Pay Contractors in Bangladesh With Complete Payment Records

Contractor Payment Records That Clear the Receiving Bank

Contractor Payment Records Prepared Before You Send

Paying contractors in Bangladesh goes wrong at the receiving bank, not at yours. Before crediting a service payment, the bank must see a contract, an invoice and a payment message that agree, and must be satisfied the contractor can provide the service. A missing record holds the payment. Eicra Soft Limited prepares that record set for every payment you send.

Contractor payment records are the documents a Bangladesh bank checks when money arrives from abroad for services: the signed agreement, an invoice for the period, the matching payment reference, and the Form-C position for the amount. You keep sending the money from your own account; we make sure the paperwork reaches the bank before the money does.

Send us your contractor list Tell us how many contractors you pay, how each is paid today and whether a bank has ever held a credit. We book a short scoping call, then send a written quote, and the records work starts only once you approve that quote.

Scope 01 · A written quote
Review 02 · A gap list
Prepare 03 · Invoice and reference per payment
Check 04 · Form-C and tax position
File 05 · The bank-query pack

What does the payment records service include?

Six records travel with every payment to a contractor in Bangladesh, and the service prepares and keeps all of them: the signed contractor agreement, an invoice for each payment, a payment reference that matches it, the Form-C threshold check, a dated tax-and-incentive note, and the pack the contractor hands the bank when it still asks.

Signed contractor agreement

The first document a receiving bank asks for: scope, fees, invoicing terms, intellectual property, confidentiality, notice and governing law, drafted and signed through our contractor management service and quoted on every invoice, so each payment points back to one agreement.

Invoice for every payment

One invoice per payment, in the contractor’s name, matching the agreement’s fee terms, the period worked and the amount you send, prepared before the money leaves and stored against the payment, so no credit arrives without the document that explains it.

Matching payment reference

The reference, amount, currency and payer name in your bank’s payment message checked against the invoice before you send, because the receiving bank compares the two, and a mismatch is the most usual reason a credit is held or queried.

Form-C threshold check

Each payment measured against the USD 20,000 per-transaction figure under which a bank may credit service income without Form-C; above it the contractor files the online Form-C, and we tell you before you send, not after the bank has asked.

Tax and incentive note

A dated note in the file on what the bank may deduct at source and what the contractor may claim as export cash incentive, re-read whenever Bangladesh Bank or the National Board of Revenue changes the position, so neither side is surprised.

Bank-query pack for the contractor

When a bank still asks, the contractor receives a complete pack from the file: agreement, invoices, payment references and a one-page cover note in plain English, kept with the payment, so one bank query is answered once and never repeated.

What does the bank check before crediting?

Part-H of Bangladesh Bank’s FEPD-1 Circular No. 26, issued on 30 July 2026, lets a bank credit a service payment on electronic evidence instead of export paperwork, but the bank must still be satisfied the payment is genuine. It decides from the four things below, and every one of them starts with the contractor agreement, which is why Eicra Soft Limited drafts that first.

We prepare contracts and records; we do not move your money, set exchange rates, or promise that a bank will credit a payment.

The signed contract on file

A signed agreement naming the parties, the service, the fee and the invoicing terms. The circular tells the bank to ensure the recipient has the capacity to provide the service, and the signed contract is where the bank looks first.

The invoice and reference

An invoice for the period and amount, and a payment message whose reference, payer and amount match it. Emails, platform statements and remittance messages count as electronic evidence under the circular; a bare transfer with no supporting document behind it does not.

The amount and Form-C

A payment up to USD 20,000 per transaction may be credited without Form-C under Part-H of FEPD-1 Circular No. 26. A larger payment needs the online Form-C, filed electronically by the contractor, before the receiving bank lets the credit go through.

Tax and incentive

Whether any deduction at source applies, and whether the contractor can claim the export cash incentive. The circular says “applicable taxes, if any” and sets no rate, so the file records the current position with the date it was last checked.

How does the payment records service run?

Held payments happen when the invoice is written after the bank asks and the agreement was never signed. The service runs in five steps, and nothing is prepared until you approve the quote. Each step ends with a document you keep, and you send every payment yourself, from your own account, on your own schedule.

The five steps of a contractor payment record set
The five steps of the payment records service, with your decision and what you receive at each step
StepWhat happensYour decisionWhat you receive
1. ScopeA short call on your contractors, routes and payment sizesWhether to go aheadA written quote
2. ReviewWe read every agreement, recent invoice and payment message side by sideWhich gaps to close firstA gap list
3. PrepareWe prepare an invoice and reference for each payment before you sendApproval of each month’s fileInvoice and reference per payment
4. CheckWe flag the Form-C threshold and note the tax position for each paymentWhen to sendForm-C and tax position
5. FileWe keep the pack the contractor hands the bank if it asksWhether to continue next monthThe bank-query pack

Every month repeats steps 3 to 5; cancel any month.

Has a bank held a contractor payment?

A held payment is the case this page exists for. The bank could not match the credit to evidence: a corporate payer with no invoice, an amount that differs from the invoice, or a contractor with no agreement on file. We read the bank’s query, build the missing records, and the contractor hands them in.

The same records then travel with every later payment, so the question is answered once.

The bank’s query read and answered from documents
Missing agreement or invoice prepared and dated
The pack kept for every payment after it

Paying several contractors every month?

When several contractors are paid on different terms, invoices drift from agreements and references stop matching. We prepare each month’s invoices on one structure, check every payment reference before you send, and flag any payment above the Form-C threshold, so ten payments carry the same record set as one and the bank sees the same pattern every time.

New contractors join through the agreement first, then enter the monthly file.

One invoice structure for every contractor
Every reference checked before the money leaves
Threshold flagged per payment, not per month

Does your contractor work like staff?

A person working fixed hours, only for you and under your direction can count as a worker under the Bangladesh Labour Act 2006 whatever the invoice says, and the misclassification risk sits with the engaging company. Paying such a person as a contractor does not change that. The right route is employment through our remote staffing service.

What changes if the person is a worker? Payroll, leave and notice follow the Act, and the contractor file closes cleanly.

Status reviewed when the agreement is drafted
Full-time roles moved to remote staffing
No contractor paperwork used to cover employment

What does this service not include?

Contractor payment records at Eicra Soft Limited are document work only. We do not send, hold or convert money, we do not quote or set exchange rates, we do not give tax or legal advice, and we do not promise that a bank will credit a payment. The bank decides; we give the contractor the file.

Money stays with you

Every payment leaves your own bank account and lands in the contractor’s. No account, wallet or card of ours is ever in the chain, and no payment authority or bank credential is ever shared with us at any point in the engagement.

Rates stay with your bank

We do not quote, set or compare exchange rates, and we make no claim about markups or savings. The rate you get is between your own bank, any platform you choose to use and the contractor’s receiving bank in Bangladesh.

Advice stays with your advisers

We record the tax and incentive position and its date; we do not advise on tax or law, and we never promise that a bank will credit a payment. Where a question needs a licensed adviser, we say so and hand over the file.

What do you gain from prepared records?

A prepared record set turns a payment the bank must question into one it can match. The four gains below are the ones buyers name after the first month: fewer holds, one answer per query, a threshold never missed, and a contractor who is not surprised by a deduction.

Fewer holds at the bank

The invoice and the payment reference exist before the money leaves your account, so the receiving bank can match the credit on arrival instead of writing to the contractor and waiting for documents that were never prepared in the first place.

One answer per query

When a bank asks a question, the pack is already assembled from the contractor file: the agreement, the invoices, the payment references and a plain-English cover note. The same pack then travels with every later payment to that same contractor.

Threshold never missed

Every payment is measured against the USD 20,000 per-transaction figure before you send it, so the online Form-C is filed by the contractor when it is needed and never discovered after the bank has already held the credit for checking.

No surprises for the contractor

The dated tax and incentive note tells the contractor what the bank may deduct at source and what they may claim as export cash incentive, with the date the position was last checked, so nobody is surprised when the credit arrives.

Which references help before you send?

Three references answer most questions before a scoping call. Read them first; our employer of record services page explains the route for people who work full time for you, and the contractor management page explains the agreement every record set starts from.

Bangladesh Bank, FEPD-1 Circular No. 26

Part-H sets the rules for service income: credit on electronic evidence, the USD 20,000 per-transaction Form-C threshold, the bank’s duty to ensure the recipient can provide the service, and deduction of applicable taxes. Issued on 30 July 2026, it consolidates the export rules. Read the circular on the Bangladesh Bank website.

Wise, guide to BDT transfers

Wise states that business transfers to Bangladeshi taka are not supported and caps personal transfers at 995,000 taka per transfer to a bank account, which is why companies pay contractors by international bank wire instead. Read the Wise help page.

Bangladesh Bank export cash incentive

For FY2026-27, Bangladesh Bank retained a 2.5% cash incentive for individual freelancers earning foreign income and 6% for software, hardware and ITES exporters, paid to the Bangladesh-side recipient through their own bank. Read the Dhaka Tribune report on the FY27 rates.

What do buyers ask about contractor payments?

Buyers ask eleven questions about paying contractors in Bangladesh before they book a call. They ask what the records service includes, how the payment itself travels, what evidence the bank needs, when Form-C applies, what taxes and incentives exist, and where our work stops. Each answer below opens with the answer sentence.

More answers
FAQ  |  01

What does the records service include?

The service includes the six records a payment needs: the signed contractor agreement, an invoice for each payment, a matching payment reference, the Form-C threshold check, a dated tax and incentive note, and the bank-query pack. You send the money yourself; Eicra Soft Limited prepares and keeps the records.

FAQ  |  02

How do we pay a contractor?

By international bank wire from your company account into the contractor’s Bangladesh bank account, with an invoice and a payment reference that match a signed agreement. The receiving bank checks that evidence before crediting the money. Some platforms carry personal transfers in taka but not business ones, so check the route first. We prepare the records; you send the payment.

FAQ  |  03

What evidence does the bank need?

The bank needs electronic evidence that the payment is genuine: a signed agreement naming the service and the fee, an invoice for the period and amount, and a payment message that matches the invoice. Under Part-H of FEPD-1 Circular No. 26, emails and platform statements also count as evidence.

FAQ  |  04

When is Form-C needed?

Form-C is needed when a single payment is above USD 20,000. Under Part-H of Bangladesh Bank’s FEPD-1 Circular No. 26, a bank may credit service income up to USD 20,000 per transaction without the declaration; above it, the contractor files the online Form-C before the credit. We flag this before you send.

FAQ  |  05

Why was a contractor payment held?

A payment is held when the bank cannot match the credit to evidence: a corporate payer with no invoice, an amount that differs from the invoice, or a contractor with no agreement on file. We read the bank’s query, prepare the missing records, and the contractor hands the pack to the bank.

FAQ  |  06

What taxes apply to contractor payments?

The circular requires the bank to deduct applicable taxes, if any, and sets no rate itself. We keep a dated note in the contractor file of the current deduction and incentive position, and we re-check it when Bangladesh Bank or the National Board of Revenue changes the rules. We do not give tax advice.

FAQ  |  07

Can the contractor claim a cash incentive?

Yes, if they qualify. For FY2026-27, Bangladesh Bank retained a 2.5% cash incentive for individual freelancers earning foreign income and 6% for software, hardware and ITES exporters. The incentive is paid to the Bangladesh-side recipient through their own bank; the contractor claims it, not the payer.

FAQ  |  08

Do you move the money for us?

No. Eicra Soft Limited never sends, holds or converts money, never quotes an exchange rate and never promises that a bank will credit a payment. Every payment travels from your own bank account to the contractor’s. We prepare the documents that travel with it, and nothing more than that.

FAQ  |  09

When is a contractor an employee?

A contractor can count as a worker under the Bangladesh Labour Act 2006 when the person works fixed hours, only for you and under your direction, whatever the invoice says. The misclassification risk sits with your company, so we move full-time roles to remote staffing, where Eicra Soft Limited is the employer.

FAQ  |  10

What happens after we get in touch?

After you get in touch, the work follows a fixed order, and nothing is prepared or charged until you approve a written quote. You can stop after any step and keep the documents it produced, including the gap list and any prepared invoices.

  1. We hold a short scoping call about your contractors and payments.
  2. You receive a written quote and a gap list of missing records.
  3. We prepare the invoice and reference for each payment you plan.
  4. The file and the bank-query pack stay ready for every later payment.
FAQ  |  11

What does the service not cover?

The service does not cover sending, holding or converting money, quoting exchange rates, giving tax or legal advice, or guaranteeing that a bank will credit a payment. The bank decides; we give the contractor the complete file. If a role looks like employment, we move it to remote staffing instead.

Ready to send the next payment with its records?

Request A QuoteGet in Touch

Your request is subject to our Terms and Privacy Policy.